I just recently became owner of a Cub Cadet 129 Hydrostatic with 48-inch(I think) mower-deck.
I looked at several parts breakdowns at a popular Cub Cadet parts site (the name slips my memory), but none of the exploded diagrams were an exact match to the unit I have.
What is different about mine from those pictured is that, down low on the bottom-right-front of the frame, poking through a slot in the frame, is a notched metal push-lever that, when pushed in until the notch engages, releases tension on the right-side blade-belt-pulley.
Also, instead of the pictured double belt tension adjusters, one each side, on mine, a spring tensions the right-side and a J-bolt pokes through the front-left-side frame, with adjusting nut.
The engine is KOHLER.
The starter and generator are one and the same.
There is a serial-number on a plate located on the left-side of the frame, but I have as yet not had pen, paper, and spectacles all at hand to record it.
A few questions :
1. I would like an owners manual, preferably a factory service manual, for my particular machine; where might I obtain such ??
I especially need to know such things as belt lengths and whether A or B belts, plus oil and fluid capacities and what fluids are recommended.
2. Also, the right side of the deck rides about an inch higher than the left; is there an adjusting screw/bolt that will correct this ??
3. Located on the main drive-shaft, just ahead of the seat, is a plastic fan that has only one blade remaining; how important is this fan ??
4. Considering the information thus given, approximately what year was this machine built ??
I will attempt to read and note the serial-number at the soonest convenience.
Many thanks.![Cub cadet 109 hydrostatic manual diagram Cub cadet 109 hydrostatic manual diagram](https://emanualonline-com-live-qyl5lwi99zeh.netdna-ssl.com/images/GS/other/1/17296.jpg)
![Cub Cadet 109 Hydrostatic Manual Cub Cadet 109 Hydrostatic Manual](/uploads/1/1/9/3/119386966/579574068.jpg)
I looked at several parts breakdowns at a popular Cub Cadet parts site (the name slips my memory), but none of the exploded diagrams were an exact match to the unit I have.
What is different about mine from those pictured is that, down low on the bottom-right-front of the frame, poking through a slot in the frame, is a notched metal push-lever that, when pushed in until the notch engages, releases tension on the right-side blade-belt-pulley.
Also, instead of the pictured double belt tension adjusters, one each side, on mine, a spring tensions the right-side and a J-bolt pokes through the front-left-side frame, with adjusting nut.
The engine is KOHLER.
The starter and generator are one and the same.
There is a serial-number on a plate located on the left-side of the frame, but I have as yet not had pen, paper, and spectacles all at hand to record it.
A few questions :
1. I would like an owners manual, preferably a factory service manual, for my particular machine; where might I obtain such ??
I especially need to know such things as belt lengths and whether A or B belts, plus oil and fluid capacities and what fluids are recommended.
2. Also, the right side of the deck rides about an inch higher than the left; is there an adjusting screw/bolt that will correct this ??
3. Located on the main drive-shaft, just ahead of the seat, is a plastic fan that has only one blade remaining; how important is this fan ??
4. Considering the information thus given, approximately what year was this machine built ??
I will attempt to read and note the serial-number at the soonest convenience.
Many thanks.
The Cub Cadet 109 is a 2WD garden tractor from the 1X8/1X9 series. This tractor was manufactured by Cub Cadet (a part of International Harvester) in Louisville, Kentucky, USA from 1971 to 1974. The Cub Cadet 109 is equipped with a 0.4 L single-cylinder gasoline engine and hydrostatic transmission with infinite forward and reverse gears.
Microsoft office torrent download mac. The Cub Cadet 109 garden tractor used the Kohler K241A engine. It is a 0.4 L, 391 cm2, (23.9 cu·in) single-cylinder natural aspirated gasoline engine with 82.6 mm (3.25 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. This engine produced 10.2 PS (7.5 kW; 10.1 HP) at 3,600 rpm of maximum output power. Datacard cd800 printer driver for mac.
The Cub Cadet 109 is equipped with manual steering, dry disc brakes, open operator station and 7.6 liters (2 US gal.; 1.7 Imp. gal) fuel tank.
Operator's Manual Disclaimer: The operator's manual posted is for general information and use. To ensure the download of the operator's manual specific to your unit, we require a model and serial number. Professional Products: Cub Cadet commercial products are intended for professional use. Cub Cadet 73, 106, 107, 126, 127, 147 Series (1969) Service Manual: Cub Cadet G/SG 1340, 1535, 1541, 1860, 1862, 1782, 1882, 2082, 2182 Series (1990-1992) Service Manual: Cub Cadet 86, 108, 109, 128, 129, 149, 169, 800, 1000, 1200, 1250, 1450, 1650 Series Service Manual: Cub Cadet 70, 100 Series (1963) Service Manual - Chassis: Cub Cadet. PDF Manuals for IHC built Cub Cadets and attachments! Original: Original Operators Manual. Original Service Manual. Service Manual 86, 108, 109, 128, 129, 149, 169. Type: Cub Cadet 86, 108, 109, 128, 129, 149 and 169 Tractor Service Manual 152 Pages. If not present in the table of content details service information about the engine will be provided by the engine manufacturer in most cases. The Cub Cadet 86, 108, 109, 128, 129, 149 and 169 tractors manual instruction are for use by trained technicians who.
Following attachments are available for the Cub Cadet 109 garden tractor: Photostory dowload.
- Mid-mount Cub Cadet 38 in (960 mm) mower deck with 3-blades
- Mid-mount Cub Cadet 44 in (1,110 mm) mower deck with 3-blades
- Mid-mount Cub Cadet 50 in (1,270 mm) mower deck with 3-blades
![Cub cadet 109 hydrostatic manual diagram Cub cadet 109 hydrostatic manual diagram](https://emanualonline-com-live-qyl5lwi99zeh.netdna-ssl.com/images/GS/other/1/17296.jpg)
Cub Cadet 109 Specifications
![Cub Cadet 109 Hydrostatic Manual Cub Cadet 109 Hydrostatic Manual](/uploads/1/1/9/3/119386966/579574068.jpg)
General Specifications | |
Model | Cub Cadet 109 |
Length | 1,750 mm (68.9 in) |
Width | 830 mm (32.7 in) |
Height | 1040 mm (40.9 in) |
Wheel base | 1,110 mm (43.7 in) |
Weight | – |
Fuel tank capacity | 7.6 liters (2 US gal.; 1.7 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station |
Engine | |
Engine model | Kohler K241A |
Engine type | Four-stroke, air-cooled, inline |
Cylinders | 1 |
Fuel type | Gasoline |
Displacement | 0.4 L, 391 cm2, (23.9 cu·in) |
Bore and stroke | 82.6 mm X 73.0 mm (3.25 in X 2.87 in) |
Horsepower | 10.2 PS (7.5 kW; 10.1 HP) at 3,600 rpm |
Starter | Electric |
Oil type | SAE 5W-20, 10W, 30 |
Oil capacity: | 1.4 L (1.5 US. qt, 1.2 Imp. qt.) |
Spark plug | Champion H10 |
Cub Cadet 109 Hydrostatic Manual Free
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Dry disc |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite forward and reverse |
Speed | Forward: 12.9 kmh (8 mph) Reverse: 6.4 (4 mph) |
Transmission oil capacity | 6.6 L (1.7 US. gal, 1.5 Imp. gal.) |
Tires | |
Front tires | Lawn/turf: 4.80×4.00-8 |
Rear tires | Lawn/turf: 6-12 |
Cub Cadet 109 Hydrostatic Manual Parts
Three-Point Hitch | |
Caterogy | Sleeve hitch (optional) |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Front PTO type | Independent with mechanical clutch |
Front PTO spped | – |